The top-line for advanced kiters.The first kite line, with the extremely complex Fibretec ® method is post.
This usually only needed for the offshore sector increased strength of construction and the resulting radically reducedexpansion make it an absolute high-performance product.
SCPS and the additional Cyclone impregnation is also applied.
Fibretec®
- significant increase in the minimum breaking strength (load capacity)
- rapid reduction of the elongation
- reduced overall diameter of the line
- Abrasion-resistant surface and thus extends their life
| | SCPS (Surface-Closing-Plaid-System)
SCPS is one of the company Lippmann developed method to optimize the surface of a leash for each application, so that a very smooth and continuous outer skin is formed |
Breaking Load
| Diameter
|
50 kg / 110 lbs.
| 0,70 mm
|
70 kg / 154 lbs.
| 0,80 mm
|
100 kg / 220 lbs
| 1,00 mm
|
130 kg / 286 lbs.
| 1,20 mm
|
170 kg / 374 lbs.
| 1,50 mm |
Delivery in plastic box
- Breaking load
- 100 kg / 220 lbs.
- Diameter
- 1,0mm
- Colour
- white
- Length
- aproxx 100m
Manufacturer and contact information for this product:
Lippmann German Ropes GmbH & Co. KG
Dubbenwinkel 11
21147 Hamburg
info@lippmann.de
040 - 797 005 - 0
Safety instructions for this product:
- Choking hazard due to small parts, keep away from small children
- Danger of strangulation
- Keep away from small children
- Usage only under adult supervision
General safety instructions for kites:
- Attention, danger to life! Never fly a kite during a thunderstorm or if bad weather is coming up.
- Attention, danger to life! Never fly near power lines, busy roads or airports.
- Never fly your kite on crowded flying sites! Ensure that the kite has as much space as required to the left and right as it needs forward.
Onlookers are often not aware of the risk and are safest if they stay behind the pilot.
- Maintain distance from the other kite fliers. Tight lines cut through each other and are razor-sharp!
